Results 1 to 10 of 10

Thread: Image Sharpening

  1. #1
    Regular Member digidark's Avatar
    Join Date
    Jul 2007
    Location
    Darlington
    Posts
    1,451
    Cameras and Equipment

    Canon 300D Panasonic FZ50 CS2 Lightroom

    Default Image Sharpening

    One thing most people have problems with is Image Sharpening. The following is for Photoshop but most Graphics programs will be similar.

    You need to remember ,that if you are shooting in jpeg, your camera will already have sharpened the image to a certain extent. So don't over do it.


    1. Sharpening is the very very last thing you do

    2. Make sure your Layers palette is open

    3. Duplicate the Background Layer, by clicking and dragging it over the New Layer icon at the bottom of the Layers window (or press Ctrl +j)

    4. Click on the little arrow towards the top of the Layer palette,next to were is says "normal" and select "Overlay". Your picture will look grotty but worry not.

    5. On the Menu bar, select FILTER - OTHER - HIGH PASS.

    6. A small window will appear. The grey area is your picture (trust me, it is)....Now move the slider until you start to see edges appear, then back it off a tiny amount.

    7. That's it. Flatten your image, LAYER - FLATTEN IMAGE

    8. The amount of sharpening varies with the size of the image.

    9. As with any sharpening, it will not put an out of focus image into focus
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	yellow rose HPF.jpg 
Views:	266 
Size:	373.8 KB 
ID:	2790   Click image for larger version. 

Name:	yellow rose.jpg 
Views:	253 
Size:	392.3 KB 
ID:	2791  
    IF TIN WHISTLES ARE MADE OF TIN

    WHAT DO THEY MAKE FOGHORNS OUT OF?


  2. #2
    Administrator rolf's Avatar
    Real Name
    Rolf
    Join Date
    Jan 2007
    Location
    Tilehurst, Berkshire
    Posts
    11,264
    Cameras and Equipment

    Olympus E-30, Sigma 50-500mm Lens, Sigma 150mm Macro lens, Zuiko 70-300mm lens, Sigma 50mm F1,4 lens, Extension tube, 1.4x tele-converter, Carbon FibreTripod, Monopod, Vanguard Binoculars, Celestron 80F-ED Scope, Remembird recorder.

    Default

    Nice HowTo Ian, will have a play with that later.

    For out of focus (most of my shots) I use Focus magic.
    Rolf

  3. #3
    Regular Member digidark's Avatar
    Join Date
    Jul 2007
    Location
    Darlington
    Posts
    1,451
    Cameras and Equipment

    Canon 300D Panasonic FZ50 CS2 Lightroom

    Default

    Your not supposed to admit any of your shots are out of focus
    IF TIN WHISTLES ARE MADE OF TIN

    WHAT DO THEY MAKE FOGHORNS OUT OF?


  4. #4
    Founder Member mhuk's Avatar
    Real Name
    Mark
    Join Date
    Feb 2007
    Location
    Worcester
    Posts
    56
    Cameras and Equipment

    Canon 20d # Casio S770

    Default

    Another way is to use the Unsharp Mask (USM) in PhotoShop (as the last step in processing; I only use it on a copy of the final image):

    1. Image > mode > Lab Color
    2. On the Channels tab of the Layers palette deselect Lab, a and b
    3. Filter > Sharpen > Unsharp Mask

    Start with Amount = 50%, radius = 4, threshold = 0 and take it from there.

    It is also useful for "enhancing" black and white photos.

  5. #5
    Administrator rolf's Avatar
    Real Name
    Rolf
    Join Date
    Jan 2007
    Location
    Tilehurst, Berkshire
    Posts
    11,264
    Cameras and Equipment

    Olympus E-30, Sigma 50-500mm Lens, Sigma 150mm Macro lens, Zuiko 70-300mm lens, Sigma 50mm F1,4 lens, Extension tube, 1.4x tele-converter, Carbon FibreTripod, Monopod, Vanguard Binoculars, Celestron 80F-ED Scope, Remembird recorder.

    Default

    Had a play with that last week, but couldn't get any really good results, but perhaps I need to read up on it a bit.
    Rolf

  6. #6
    Founder Member Chocky's Avatar
    Real Name
    Beryl
    Join Date
    Apr 2007
    Location
    Exmouth
    Posts
    17,488
    Cameras and Equipment

    Nikon D7200 Camera. Nikon 55-300mm VR F4.5-5.6G ED AF-S DX NIKKOR SWM WAF-5 DX Micro Nikkor 40mmf/2.8G SWM DX swm ED af aspherical 18-55 With wide angle converter Nikon Coolpix S5100 Sony HandycamDCR-SR58 Hama tripod Canon Pixma iP7250 PixmaMG5500

    Default

    I only use UnSharp Mask. would never us any of the sharps except USM in a photo. You need to adjust it though for every photo.
    I often go for amount 35 and radius 3.5 but watch for the halo on sky shots. The threshold at the bottom will also soften the photo. I don't use that I use Nose reduction. that needs a lot of playing around with. And if you pic is vivid you can adjust that with the hue and Saturation and move the Saturation slider to about -10 - -20

  7. #7
    Founder Member Babs's Avatar
    Real Name
    Barbara
    Join Date
    Apr 2007
    Location
    Greater Manchester
    Posts
    1,756
    Cameras and Equipment

    The equipment I use is a Canon 30D with Sigma 50-500mm lens. I also have a garden hide from which I take most of my pictures.

    Default

    All sounds very complicated to me I'm afraid. I have photoshop but don't use it I use the free Picasa2, and I only sharpen my images once, I just find the software easy to use

  8. #8
    Member
    Join Date
    Jan 2008
    Location
    New Zealand - South Island
    Posts
    77
    Cameras and Equipment

    I don't have a Fuji Film FinePix S5700 camera anymore husband has taken it for work, I am in the learning stages. I can't seem to stay away from the computer.

    Default

    Hi can you tell me the differance between this method and using the Filter and "sharpen" in Photoshop, is one method better than the other or will both do the same job.

    I had a play and could do what you said and learned something new.

    Sitereh

    P.S. not too complicated an answer please..lol

  9. #9
    Regular Member digidark's Avatar
    Join Date
    Jul 2007
    Location
    Darlington
    Posts
    1,451
    Cameras and Equipment

    Canon 300D Panasonic FZ50 CS2 Lightroom

    Default

    hi sitereh,with the unsharp mask etc in PS its a suck it and see situation with very little control.The High Pass filter method allows you to make fully controlable selective sharpening i.e. the mouth and eyes in a portrait shot whilst leaving the skin tones etc alone.If you would like to delve deeper into high pass filtering, a good place to start is http://www.photoshopsupport.com/tuto...harpening.html
    IF TIN WHISTLES ARE MADE OF TIN

    WHAT DO THEY MAKE FOGHORNS OUT OF?


  10. #10
    Member
    Join Date
    Jan 2008
    Location
    New Zealand - South Island
    Posts
    77
    Cameras and Equipment

    I don't have a Fuji Film FinePix S5700 camera anymore husband has taken it for work, I am in the learning stages. I can't seem to stay away from the computer.

    Default

    Thank you for that. I never gave the tone a thought and sometimes it does mess the photos up and I dont use it.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Night-sky image is biggest ever
    By WD-40 in forum Wildlife News feeds
    Replies: 0
    Last Post: 12-01-2011, 01:29 AM
  2. Single molecule's stunning image
    By WD-40 in forum Wildlife News feeds
    Replies: 0
    Last Post: 28-08-2009, 08:33 AM
  3. Sloth's lazy image 'a myth'
    By WD-40 in forum Wildlife News feeds
    Replies: 0
    Last Post: 14-05-2008, 01:01 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Copyright of members' images remains with the individual member and these images may not be reproduced or downloaded without their written permission.
If you cannot contact the relevant member for permission, please contact Thames Valley Birds and we will pass on your request.

pets and plants

WYW
Birding Top 500 Counter RSPB - Nature's Voice
The Admin Zone Directory of Forums


Top Lists